|
Henry Taylor Woodturning Tools
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Skew Standard Henry Taylor skews
are used for convex, conical and cylindrical features in spindle turning.
They are also used for cleaning up end grain and v cuts.Standard
skews are stronger and heavier and less prone to vibration.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Skew Oval Henry Taylor skews
are used for convex, conical and cylindrical features in spindle turning.
They are also used for cleaning up end grain and v cuts. Oval section skews
are easier to use and offer enhanced sensitivity and precise handling. They
are more stable on the rest and less prone to 'dig-ins
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
****Please click on this link EMAIL to make enquires and place orders**** |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Mini Tools Henry
Taylor Micro Tools...Sold separately five tools of the same quality As other Henry Taylor
tools. These tools would cover the majority of needs of the miniature turner.
All tools are Handled, handle length 175mm (7") and An average blade
length is 95mm (3.3/4").Supplied in separate plastic wallets
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Spindle
Gouge Round Bar
1.1/4 Forged Roughing / Spindle Gouge
|
Spindle Gouges Henry Taylor Spindle Gouges machined from bar
Spindle gouges are used for detailed shaping between centers particularly for
concave curves. In skilled hands they are effective at hollowing of goblets. Round Bar Click Here for
Larger Photo Forged Bar Click
Here for Larger
Photo
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Dale Ellsworth
Signature Bowl Gouge
|
Bowl Gouges Henry Taylor Superflute HS1
designed in 1978 by Roy Child is perhaps the most famous woodturning tool of
all times. They have sold in thousands all over the world and remain the
ultimate gouge used by most leading turners. Now made in a range of sizes.
The 3/8" gouge for small bowls on very delicate cuts. And the 1/2"
& 5/8" gouge recommended for general purpose work.
(All bowl gouges are
measured by their outside diameter)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Henry Taylor large forged gouges are used between centres to take the
corners off and shape shallow curves. Easy to use, safe, efficient and fast.
Used with a slicing cut, they can give an excellent finish akin to that
Produced by the skew.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Henry Taylor Square Nose Scrapers - Used to
hollow and finish flat surfaces such as inside lidded boxes and containers
with straight sides.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Round Nose Scrapers Henry Taylor Round Nose Scrapers - Used to
hollow and finish round bottom surfaces such as inside lidded boxes, bowls
& vases.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Peter Child Heavy Scrapers Made by Henry Taylor Tools Henry Taylor Heavy Duty scrapers are
designed for heavy work as they are 3/8" thick the vibration is minimal
when doing some series scraping. Ideal for large bowls, Platters & deep
scraping
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Side Scraper
Henry Taylor Round side scrapers are useful
for doing undercuts in side bowls vases, Used to hollow and finish the sides
and the base, such as the inside of a turned container.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
****Please click on this link EMAIL to make enquires and place orders**** |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Diamond Section Parting Tool
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Beading & Parting Tool Henry Taylor Beading & parting tool For
forming beads, rounding off or cleaning up the ends of cylinders, forming
short straight sections, cutting straight bottom notches, turning spigots and
for V cuts.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Parting Tool Henry
Taylor Parting tools are for cutting deep grooves and for separating finished
work from the waste.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Thin Parting Tool Henry
Taylor The 1" x l /16" parting tool is the thinnest standard
parting tool currently available, producing minimal waste when used.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
****Please click on this link EMAIL to make enquires and place orders**** |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
MICRO TOOL SET Henry
Taylor Micro Tools...Is a set of five tools of the same quality as other
Henry Taylor tools. These tools would cover the majority of needs of the miniature
turner. All tools are handled, handle length 175mm (7") and an average
blade length is 95mm (3.3/4"). Supplied in a plastic wallet. 1 x 1/8" Mini gouge 1 x 1/4" Mini spindle gouge 1 x 1/4" Skew 1 x 1/4" Round nose scraper 1 x 1/4" x 1/8" Parting tool $251.50 per set |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Henry
Taylor The Decorating Elf... The most versatile
texturing tool available and so simple to use. Cuts wood -
side & end grain, acrylics, alternative ivory, bone, antler and pewter.
Use it on concave, flat and convex surfaces. The "Decorating Elf"
comes with an 8mm (5/16") ball cutter made from High Speed Steel. An
important feature is the collar on the shank; it is there so that the brass
body does not interfere with whatever you are decorating. Also in the pack is
a Natural Hair Burnishing Brush, which is a key component in producing a
clean and crisp pattern. There is no need to use abrasive materials (the
Instruction Sheet and DVD tell you how).The brush not only cleans and removes fibres but also burnishes the surface - ready to take the
finish of your choice.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Cylinder Cutter
HS 903 |
Cylinder Cutter HS 903 This cutter is capable of creating pinpoint indents through to
spiralling arcs on the work. The cutter
can be used on the side, the outer edge of the top face, and also by angling
the top face against the work. You do not have to hold the cutter in one
position - you can run or arc the cutter across the work to create a
radiating pattern which either arcs into the centre or out to the outer rim
of the piece you are working on. $21.50
ea |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Bud Cutter HS
904 |
This
cutter, with its flame-like section, allows you to present it in positions
than with the ball-end cutter. This and the ball & cylinder cutters give
the most decorating options when working on side grain work. The shape allows
you to create smaller and wider decorative patterns. $21.50 ea |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Ball Cutter HS
906 |
Ball
Cutter HS 906 This
cutter, with its ball shape section, allows you to present it in many more
positions than with the bud cutter. This and the cylinder & bud cutter
give the most decorating options when working on side grain work. The shape
allows you to create smaller and wider decorative patterns. $21.50 ea |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Negative-Rake Coving Tool This is effectively a HSS negative-rake scraper with a fingernail-profile on
the end. The top face is concave and it can cut be used as a push-in
profiling tool, or for a more efficient cut. $45.50 ea |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Prices subject to change without notice |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
